Armeg Product Guide

PTC – Diamond Crown Porcelain Tile Drills

PTC – Diamond Crown Porcelain Tile Drills

Perfect for….. Ultimate durability for small and large diameter holes in porcelain tiles

Large Diamond Crown sizes 13 to 58mm

Small Diamond Crown sizes 6 to 10mm

Thin Wall 2 Piece Diamond Segment

Thin Wall Continuous Diamond Segment The thin wall profile reduces the ‘drag’ when drilling in tiles leading to faster tile penetration and easier tile slug removal

10mm Hexagon Shank For direct fitting in to drill chucks and guaranteed non-slip action Core Ejection Slot Provides easy and hassle free extraction of tile slugs from the slug chamber Extreme Crown & Body Bond The diamond crown is bonded to the steel body with a copper braze heated at over 600°C to create an extreme bond for extreme durability

Spanner Flats Spanner flats precision machined on all crown bodies aid simple and rapid disassembly of crowns from adaptors for user convenience Fully ‘Heat Treated’ Alloy Steel Body Fully ‘heat treated’ 34CrNiMo6 alloy steel body provides a durable construction which can withstand intensive use for consistently reliable performance Extreme Crown & Body Bond The diamond crown is bonded to the steel body with a copper braze heated at over 600°C to create an extreme bond for extreme durability

A

E

A

E

The thin wall profile reduces the ‘drag’ when drilling in tiles leading to faster tile penetration and easier tile slug removal

B

A

B

A

C

B

B

3mm Deep Diamond Crown Segment

C

D

C

TECH TIP!

The combination of ultra hard segment and diamond grains combine to rapidly cut through porcelain tiles with an abrasive action

D

E

Water cooling is required when drilling porcelain tiles. See pages 101 and 102 for water delivery systems

D

5mm Deep Diamond Crown Segment

C

The combination of ultra hard segment and diamond grains combine to rapidly cut through porcelain tiles with an abrasive action

D

E

Piloting method for Small Diamond Crowns

Piloting method for Large Diamond Crowns

Mark the position of the desired hole

Stick the guide pad onto the clean, dry tile. The corresponding size hole to the diamond crown should be selected in line with the mark

Enter the diamond crown into the hole in the guide pad. Ensure a flow of cool water to the diamond crown and commence drilling

Drill an 8mm Pilot Hole at the centre position. PTC Carbide is shown but the hole can also be formed with Diamond Grit tile drills or PTC Small Diamond Crowns

8mm Pilot Hole

Start the water flow, enter the pilot into the pre-drilled hole and commence drilling

Scan me for demo video

95

96