Expert Electrical Main Catalogue

TOOLS & PPE Hole Saws

Part No.

Diameter

Part No.

Diameter

Fast Cut Bi-Metal Hole Saws

Inch 3/4”

mm

Inch

mm

FCH0296 FCH0258 FCH068M FCH0234 FCH0278 FCH0300 FCH0318 FCH0314 FCH0338 FCH0312 FCH0358 FCH0334 FCH0378 FCH0400 FCH0418 FCH0414 FCH0438 FCH0412 FCH0434 FCH0500 FCH0514 FCH0512 FCH0600 FCH160MM FCH168MM

FCH0034 FCH2532 FCH1036 FCH0078 FCH1056 FCH0100 FCH0116 FCH0118 FCH0136 FCH0114 FCH0156 FCH0138 FCH0176 FCH0112 FCH0196 FCH0158 FCH1116 FCH0134 FCH1136 FCH0178 FCH0200 FCH0216 FCH0218 FCH056M FCH0214 FCH0256 FCH0238 FCH0212

2.9/16” 65mm

19mm 20mm 21mm 22mm 24mm 25mm

2.5/8”

67mm

25/32” 13/16”

2.11/16” 68mm

2.3/4” 2.7/8”

70mm 73mm 76mm 79mm 83mm 86mm 89mm 92mm 95mm 98mm 102mm

7/8”

15/16”

3”

1”

3.1/8” 3.1/4” 3.3/8” 3.1/2” 3.5/8” 3.3/4” 3.7/8”

1.1/16” 27mm

1.1/8”

29mm

1.3/16” 30mm

1.1/4”

32mm

1.5/16” 33mm

1.3/8”

35mm

1.7/16” 37mm

4”

1.1/2”

38mm

The Fast Cut saw combines a new tooth material, with enhanced heat and wear resistance, and a new tooth design, providing a smoother, faster cut on a wide range of materials, when compared against the previous Constant Pitch saw. Specifically suited to cutting stainless and mild steel sheet, the Fast Cut will also cut through tubes with a wall thickness of up to 3mm (1/8”).

4.1/8” 105mm 4.1/4” 108mm 4.3/8” 111mm 4.1/2” 114mm 4.3/4” 121mm

1.9/16” 40mm

1.5/8”

41mm

1.11/16” 43mm

1.3/4”

44mm

1.13/16” 46mm

5”

127mm

1.7/8”

48mm 51mm

5.1/4” 133mm 5.1/2” 140mm

2”

• New tooth material for enhanced heat and wear resistance and greater product life. • Ideal for stainless and mild steel sheet and tubes with wall thickness of up to 3mm (1/8”).

• New 5.5 TPI / 25mm tooth form provides a smoother, faster cut in all materials. • Hole saw depth of 41mm (1.5/8”).

2.1/16” 52mm

6”

152mm

2.1/8”

54mm

6.5/16” 160mm

2.3/16” 56mm

6.5/8” 168mm FCH177MM 6.31/32” 177mm FCH210MM 8.9/32” 210mm

2.1/4”

57mm

2.5/16” 59mm

2.3/8” 2.1/2”

60mm 64mm

Tungsten Carbide Tipped Stainless Steel Sheet Metal Hole Saw

Bi-Metal Cordless Smooth Cut Hole Saws

Part No.

Diameter mm Inch 16mm 5/8” 20mm 25/32” 22mm 7/8” 25mm 1” 32mm 1.1/4” 38mm 1.1/2”

CSC16 CSC20 CSC22 CSC25 CSC32 CSC38

• Ideal for cutting stainless, tool and mild steel sheeting plus plas- terboard, wood and thin plastics. • Safety stop at the base of the hole saw prevents saw travel beyond the hole saw depth - 13mm (1/2”).

• Complete assembly - arbor, pilot drill and ejector spring included. • Constant pitch teeth provide exceptionally smooth cuts • Pitch 8 teeth per 25mm / inch. • Recommended cutting depth 2mm.

• Ideal for production cutting, and particularly suitable for use in drills with limited speed control. • Tungsten carbide tipped teeth provide superb product life and cutting performance. • Replacement pilot drills are available.

• Complete assembly - there is no requirement to purchase a separate arbor and pilot drill. • Safety stop at the base of the hole saw prevents saw travel beyond the hole saw depth - 13mm (1/2”). • Recommended cutting depth 2mm (1/8”).

Tungsten Carbide Tipped Multi Purpose Hole Saws

Part No.

Diameter mm Inch 20mm 25/32” 22mm 7/8” 25mm 1” 29mm 1.1/8” 32mm 1.1/4” 35mm 1.3/8” 40mm 1.9/16” 51mm 2”

Part No.

Diameter mm Inch 15mm 19/32” 16mm 5/8” 17mm 11/16” 18mm 23/32” 19mm 3/4” 20mm 25/32 21mm 13/16” 22mm 7/8” 23mm 29/32” 24mm 15/16” 25mm 1” 26mm 1.1/32” 27mm 1.1/16” 28mm 1.3/32” 29mm 1.1/8”

Part No.

Diameter mm Inch 30mm 1.3/16” 31mm 1.7/32” 32mm 1.1/4” 33mm 1.5/16” 34mm 1.11/32” 35mm 1.3/8” 36mm 1.13/32” 37mm 1.7/16” 38mm 1.1/2” 39mm 1.17/32” 40mm 1.9/16” 45mm 1.25/32” 50mm 1.31/32”

MPH2532 MPH0078 MPH0100 MPH0118 MPH0114 MPH0138 MPH0196 MPH0200

SM15 SM16 SM17 SM18 SM19 SM20 SM21 SM22 SM23 SM24 SM25 SM26 SM27 SM28 SM29

SM30 SM31 SM32 SM33 SM34 SM35 SM36 SM37 SM38 SM39 SM40 SM45 SM50 SM51

• Rapid, heat free stock removal of wood, MDF, plastics, plaster- board, and ceramic tiles. • Carbide tipped teeth for out- standing cutting performance and product durability. • Smooth cutting with minimal heat build up.

• Suitable for use in electric and battery powered tools. • Hole saw depth of 54mm (2.1/8”). • Special arbors featuring ex- tended length pilot drills are available, alternatively fit the longer A014CE pilot drill to our standard Starrett arbors.

51mm 2

244

Together we generate value