Wago TOPJOB-S-Rail-Mount-Terminal-Blocks

www.wago.com

WAGO Rail-Mount Terminal Blocks TOPJOB® S

Technical Data 0.14 … 1 (1.5) mm² 1 800 V/8 kV/3 2 I N 13.5 A (17.5 A)

1 Conductor range: 0.14 … 1.5 mm² “s+f-st”; Push-in termination: 0.5 … 1.5 mm² “s” and 0.5 … 0.75 mm² “insulated ferrules; 10 mm” Depending on the conductor characteristic, a conduc tor with a smaller cross section can also be inserted via push-in termination. 2 800 V = rated voltage 8 kV = rated impulse voltage 3 = pollution degree 3 Terminal blocks with a blue insulated housing are suitable for Ex i applications. 4 Terminal blocks with an Ex mark are suitable for Ex e II applications. 550 V; 13 A 12 A jumper Please observe the application notes: Separator for Ex e/Ex i applications, see page 43 Jumpers, from page 166 Testing accessories, from page 160 Marking, from page 266 Approvals and corresponding ratings, visit www.wago.com

24 … 16 AWG 600 V, 15 A U

600 V, 10 A 2 Terminal block width: 3.5 mm / 0.138 inch L 9 … 11 mm / 0.35 … 0.43 inch

32,5 mm/1.28 in

47,6 mm/1.87 in

85,9 mm/3.38 in

Double-potential terminal block; both potentials can be commoned Color Item No. Pack. Unit gray 4 2000-2141 4 50

Accessories; item-specific End and intermediate plate; 0.7 mm thick orange 2000-2196

32,5 mm/1.28 in

100 (25) 100 (25)

47,6 mm/1.87 in

85,9 mm/3.38 in

gray

2000-2195

Front-entry double-potential terminal blocks are space savers. Two independent feedthrough circuits are placed in one insulated housing on one level in just 3.5 mm. This achieves a width of just 1.75 mm versus standard through terminal blocks. Input and output of a circuit are placed on the same side of the terminal block. Both circuits can be individually marked according to input and output.

Standard and quick marking options: Three marker slots are available for both individual mar kers and marking strips.

Marking strip; plain; 11 mm wide; 50 m reel white 2009-110 1

WMB Inline; plain; 2,300 WMB markers (3.5 mm)/reel white 2009-113 1

WMB marking card; white; 10 strips with 10 markers/card; for 3.5 mm terminal block width plain 793-3501 5

2009‑193 Group Marker Carrier (equipped with marking strips) for all 2001 to 2016 Series Rail-Mount Terminal Blocks TOPJOB® S Do not use on an end plate!

Standard and quick marking options: Four marker slots (double-potential terminal blocks) are available for both individual markers and marking strips.

WAGO Rail-Mount Terminal Blocks TOPJOB® S

39