Wago TOPJOB-S-Rail-Mount-Terminal-Blocks

www.wago.com

WAGO Rail-Mount Terminal Blocks TOPJOB® S

6

4

5

3

4 Commoning with Push-In Type Jumper Bars • Commoning via open terminal side with end plate allows jumpering over two cross-section sizes for 16 mm²/6 AWG (2016 Series) and 10 mm²/8 AWG (2010 Series), e.g., from 16 mm²/6 AWG (2016 Series) to 6 mm²/10 AWG (2006 Series) or from 10 mm²/8 AWG (2010 Series) to 4 mm²/12 AWG (2004 Series). • One cross-section size can be jumpered over when com moning 6 mm²/4 mm²/2.5 mm² (10/12/14 AWG) terminal blocks (2006/2004/2002 Series): from 6 mm²/10 AWG (2006 Series) to 4 mm²/12 AWG (2004 Series) • Commoning via closed terminal side with end plate allows jumpering over two cross-section sizes, e.g., from 16 mm²/6 AWG (2016 Series) to 6 mm²/10 AWG (2006 Series) or from 6 mm²/10 AWG (2006 Series) to 2.5 mm²/14 AWG (2002 Series). 3 Commoning with Step-Down Jumpers • 2016‑499 Step-Down Jumpers common 16/10 mm² (16/8 AWG) terminal blocks (2016/2010 Series) with 10/6/4/2.5 mm² (8/10/12/14 AWG) terminal blocks (2010/2006/2004/2002 Series). • 2006‑499 Step-Down Jumpers common 6/4 mm² (10/12 AWG) terminal blocks (2006/2004 Series) with 4/2.5/1.5 mm² (AWG 12/14/16) terminal blocks (2004/2002/2001 Series). • An end plate must be inserted between the terminal blocks to be commoned.

Vertical Jumpers

5

• Created for double- and triple-deck Terminal Blocks TOPJOB® S, the vertical jumpers can common two or three levels.

6 Adjacent Jumpers for Continuous Commoning • Any number of 2002 Series Terminal Blocks can be com moned without a push-in type jumper bar (2- to 10-way). • These jumpers are ideal for electric motor wiring or 4-con ductor, double-deck rail-mount terminal blocks that only have one jumper slot per level. Connection is made by inserting each contact of two adjacent jumpers in a single slot.

WAGO Rail-Mount Terminal Blocks TOPJOB® S

35