Wago TOPJOB-S-Rail-Mount-Terminal-Blocks

www.wago.com

WAGO High-Current Rail-Mount Terminal Blocks

Safety

• Warning covers visually indicate high-voltage applications, e.g., “CAUTION: Power is still on even after switching off the main switch!” • Yellow finger guards (detachable) provide touch-proof safety by shielding jumper contact slots and/or unused conductor entries. • Risk of injury! Keep fingers out of the conductor entry hole!

Voltage Tap

• Provides safe and easy power distribution to additional loads. • Insert the unwired tap before actuating the spring for termina tion. • For 35 mm² (2 AWG) blocks, insert the power tap into the jumper slot in the middle of the terminal block.

Commoning for 35 mm² (2 AWG)

Commoning

for 50, 95 and 185 mm² (2/0, 4/0 AWG and 350 kcmil)

via Step-Down Jumpers with TOPJOB® S

Testing

Commoning adjacent termi nal blocks using a centrally positioned push-in jumper. Use an operating tool to remove the conductor.

Commoning with an adjacent jumper: insert the jumper above the conductor entry hole prior to conductor termi nation. The nominal cross-section remains unchanged.

Commoning 35 mm² (2 AWG) high-current terminal blocks with 10/16 mm² (8/6 AWG) Terminal Blocks TOPJOB® S using step-down jumpers.

Easy troubleshooting via 4 mm Ø touch-proof test plug. A test plug adapter (283‑404) is used for the 35 mm² (2 AWG) terminal block (Test plugs are not available from WAGO, but are offered by industry suppliers such as Multi-Contact Deutschland GmbH).

WAGO Rail-Mount Terminal Blocks TOPJOB® S

247