Wago TOPJOB-S-Rail-Mount-Terminal-Blocks

www.wago.com

WAGO Rail-Mount Terminal Blocks with a Pluggable Connector X-COM®S-SYSTEM-MINI

1 Conductor range: 0.14 … 1.5 mm² “s+f-st”; Push-in termination: 0.5 … 1.5 mm² “s” and 0.5 … 0.75 mm² “insulated ferrules; 10 mm” Depending on the conductor characteristic, a conduc tor with a smaller cross section can also be inserted via push-in termination. 2 500 V = rated voltage 6 kV = rated impulse voltage 3 = pollution degree 3 Current-carrying capacity curves upon request Note: According to EN 61984, pluggable connectors without a current interrupting capacity must not be mated or unmated when live or under load. Notice: An appropriate end plate must be applied to the carrier terminal blocks after each female plug. Approvals and corresponding ratings, visit www.wago.com

SRP and LL, Gray

Strain Relief Plate (SRP), Gray

Locking Lever (LL), Gray

Assembled

Assembled

Assembled

SRP

Pole No.

Quantity 1-Way

2-Way

Item No. Suffix

Item No. Suffix

Item No. Suffix

Color Width

Item No.

gray gray gray gray

2 to 3 4 to 6 7 to 9 10 to 15

734-327 734-328 734-329 734-326

6mm /132-0xx 12.5mm /133-0xx 25mm /134-0xx 35mm /135-0xx

1 1 1 2

/122-0xx

–

/142-0xx /143-0xx /144-0xx /145-0xx

– – –

/124-0xx /124-0xx /125-0xx

For colored female plugs, the item number suffix “xx” must be replaced by the blue “-006” and the green-yellow “-016” color suffix.

Dimensions of locking levers

4,8

Description

Item No.

Suffix No.

Color

9,6

25,1

1-conductor female plug 2- to 15-pole

gray blue green-yellow

2020-102

none

to

/000-006 /000-016

2020-115

2-pole

5-pole

15-pole

20

17,5

30

6

12,5

35

Dimensions of strain relief plates

WAGO Rail-Mount Terminal Blocks TOPJOB® S

191