Wago TOPJOB-S-Rail-Mount-Terminal-Blocks

www.wago.com

WAGO Rail-Mount Terminal Blocks with a Pluggable Connector X-COM®S-SYSTEM-MINI

Technical Data 0.14 … 1 (1.5) mm² 1 500 V/6 kV/3 2

1 Conductor range: 0.14 … 1.5 mm² “s+f-st”; Push-in termination: 0.5 … 1.5 mm² “s” and 0.5 … 0.75 mm² “insulated ferrules; 10 mm” Depending on the conductor characteristic, a conduc tor with a smaller cross section can also be inserted via push-in termination. 2 500 V = rated voltage 6 kV = rated impulse voltage 3 = pollution degree 3 Current-carrying capacity curves upon request Note: According to EN 61984, pluggable connectors without a current interrupting capacity must not be mated or unmated when live or under load. Notice: An appropriate end plate must be applied to the carrier terminal blocks after each female plug. Approvals and corresponding ratings, visit www.wago.com

24 … 16 AWG 300 V, 15 A U 300 V, 10 A 2

I N 13.5 A 3

Module width: 3.5 mm / 0.138 inch L 9 … 11 mm / 0.35 … 0.43 inch

Pole 1

1-conductor female plug; with ground end module (green-yellow); fits into carrier terminal blocks; codable Pole No. Item No. Pack. Unit 3 2020-103/000-039 50 4 2020-104/000-039 50 5 2020-105/000-039 50 6 2020-106/000-039 50 7 2020-107/000-039 25 8 2020-108/000-039 25 9 2020-109/000-039 25 10 2020-110/000-039 25 11 2020-111/000-039 20 12 2020-112/000-039 20 13 2020-113/000-039 10 14 2020-114/000-039 10 15 2020-115/000-039 10

WAGO Rail-Mount Terminal Blocks TOPJOB® S

187