Wago TOPJOB-S-Rail-Mount-Terminal-Blocks

www.wago.com

WAGO Rail-Mount Terminal Blocks TOPJOB® S

1 (1.5) mm²; 2000 Series 3-Conductor Sensor Terminal Block TOPJOB® S

Technical Data 0.14 … 1 (1.5) mm² 1 250 V/4 kV/3 2

Technical Data 0.14 … 1 (1.5) mm² 1

1 Conductor range: 0.14 … 1.5 mm² “s+f-st”; Push-in termination: 0.5 … 1.5 mm² “s” and 0.5 … 0.75 mm² “insulated ferrules; 10 mm” Depending on the conductor characteristic, a conduc tor with a smaller cross section can also be inserted via push-in termination. 2 250 V = rated voltage 4 kV = rated impulse voltage 3 = pollution degree 3 3.5 mm spacing per signal (2 x 3.5 mm = 7 mm) Note: The double spacing per pole of this terminal block series maximizes connectivity. For example, ten sensors may be connected using only five sensor terminal blocks plus a power supply terminal block. Please observe the application notes: Jumpers, from page 166 Approvals and corresponding ratings, visit www.wago.com Accessories; for 3-conductor terminal blocks Appropriate marking systems: WMB/WMB Inline/Marking strips End and intermediate plate; 1 mm thick; for 3-conductor terminal blocks gray 2000-5391 100 (25) Push-in type jumper bar; insulated; I N 14 A; light gray 2-way 2000-402 25 3-way 2000-403 25 4-way 2000-404 25 5-way 2000-405 25 6-way 2000-406 25 7-way 2000-407 25 8-way 2000-408 25 9-way 2000-409 25 10-way 2000-410 25 Colored push-in type jumper bar red …/000‑005 blue …/000‑006 Push-in type jumper bar; insulated; I N 14 A; light gray 1 to 3 2000-433 25 1 to 4 2000-434 25 1 to 5 2000-435 25 1 to 6 2000-436 25 1 to 7 2000-437 25 1 to 8 2000-438 25 1 to 9 2000-439 25 1 to 10 2000-440 25 Double-deck marker carrier; pivoting gray 2000-121 50 (25)

24 … 16 AWG 300 V, 15 A U 300 V, 10 A 2

24 … 16 AWG 24 V, 15 A U 24 V, 10 A 2

24 VDC I N 13.5 A

I N 13.5 A

Terminal block width: 7 mm / 0.276 inch 3 L 9 … 11 mm / 0.35 … 0.43 inch

Terminal block width: 7 mm / 0.276 inch 3 L 9 … 11 mm / 0.35 … 0.43 inch

52,4 mm/2.06 in

52,4 mm/2.06 in

40,4 mm/1.59 in

40,4 mm/1.59 in

81,1 mm/3.19 in

81,1 mm/3.19 in

2000‑5311

2000‑5311/1102‑950

2000‑5311/1101‑951

S 1 S 2

S 1 S 2

S 1 S 2

S 1 S 2

S 2 S 1

S 2 S 1

3-conductor sensor terminal block

3-conductor sensor terminal block; yellow LED; for PNP (high-side) switching sensors

Color

Item No. 2000-5311

Pack. Unit

Color

Item No.

Pack. Unit

gray

gray

2000-5311/1102-950

50

50

3-conductor sensor terminal block; yellow LED; for NPN (low-side) switching sensors gray 2000-5311/1101-951 50

52,4 mm/2.06 in

49,4 mm/1.95 in

40,4 mm/1.59 in

40,4 mm/1.59 in

81,1 mm/3.19 in

81,1 mm/3.19 in

2000‑5372/1102‑953

2000‑5372

2000‑5352/1102‑953

2000‑5352

Marking strip; plain; 11 mm wide; 50 m reel white 2009-110 1

3-conductor sensor LED supply terminal block; green LED; 24 VDC

3-conductor sensor LED supply terminal block; green LED; 24 VDC control panel side: 2.5 (4) mm²; max. 28 A

WMB marking card; white; 10 strips with 10 markers/card; for 3.5 mm terminal block width plain 793-3501 5

Color

Item No.

Pack. Unit

Color

Item No.

Pack. Unit

orange

orange

2000-5372/1102-953

2000-5352/1102-953

15

50

3-conductor sensor supply terminal block; max. 250 V; internally commoned

3-conductor sensor supply terminal block; max. 250 V; control panel side: 2.5 (4) mm²; max. 28 A

Operating tool with a partially insulated shaft; type 1; (2.5 x 0.4) mm blade 210-719 1

orange

orange

2000-5372

2000-5352

15

50

128

WAGO Rail-Mount Terminal Blocks TOPJOB® S