Wago TOPJOB-S-Rail-Mount-Terminal-Blocks

www.wago.com

WAGO Rail-Mount Terminal Blocks TOPJOB® S

Technical Data 0.5 … 6 (10) mm² 1 500 V/6 kV/3 2 I N 25 A (30 A)

1 Conductor range: 0.5 … 10 mm² “s+f-st”; Push-in termination: 2.5 … 10 mm² “s” and 2.5 … 6 mm² “insulated ferrules; 12 mm” Depending on the conductor characteristic, a conduc tor with a smaller cross section can also be inserted via push-in termination. 2 500 V = rated voltage 6 kV = rated impulse voltage 3 = pollution degree 3 LED power consumption: 4.8 mA Blade-style fuses are not offered by WAGO. Thermal automotive circuit breakers are not offered by WAGO. WAGO recommends automotive circuit breakers from ETA. Please observe the application notes: Marking, from page 266 Approvals and corresponding ratings, visit www.wago.com

20 … 8 AWG 600 V, 30 A U

600 V, 30 A 2 Terminal block width: 7.5 mm / 0.295 inch L 13 … 15 mm / 0.51 … 0.59 inch

37,9mm/1.49 in

32,9 mm/1.3 in

58,1 mm/2.29 in

96,3 mm/3.79 in

Current-carrying capacity [A]

Current-carry capacity [A]

Commo ning I t

Commo ning I t

10 12 14 16 18 20 22 24 26 28 30

10 12 14 16 18 20 22 24 26 28 30

Fuse … A / Cross section … mm² In a group

Fuse … A / Cross section … mm²

4

2-conductor fuse terminal block for automotive blade style fuse; with test point; without blown fuse indication; Electrical ratings are given by the fuse. Blade-style fuses: Observe touch-proof protection for 42 V and higher voltages! Color Item No. Pack. Unit gray 2006-1681 25

4

1 2 3 4 Individual arrangement 15 A / 2.5 mm² 10 A / 2.5 mm² 20 A / 2.5 mm² 30A/4mm²

1 2 3 4

15 A / 2.5 mm² 10 A / 2.5 mm² 20 A / 4 mm² 25A/4mm²

3

3

2

2

2 4 6 8

2 4 6 8

1

1

Temperature rise ∆ T [K] Ambient operating temperature [°C]

Temperature rise ∆ T [K] Ambient operating temperature [°C]

10 20 30 40 45 50

10 20 30 40 45 50

0

0

85 75 65 55 45 40 35

85 75 65 55 45 40 35

Application Notes on Fuse Terminal Blocks Diagram: Individual arrangement

Application Notes on Fuse Terminal Blocks Diagram: Block arrangement

I rat — Displacement %

Information from the mini-automotive, blade-type fuse manufacturers

10 20 30 40

0.877 0.885 0.893 0.901 0.909 0.917 0.926 0.943 0.962 0.980 1.000 1.020 1.042 1.064 1.087 1.111 1.149 1.190 1.235 1.282 F T

%

Derating T amb /°C

– 25 – 20 – 15 – 10 – 5

14 13 12 11 10

-40 -30 -20 -10 0

0 5

9 8 6 4 2 0

10 15 20 23 30 35 40 45 50 55 60 65 70

23°C

-20

0

20

40

60

Ambient temperature °C

Application Notes on Fuse Terminal Blocks Nominal current ratings for fuse cartridges are defined dif ferently in international standards. This is why the recommended continuous current-carry ing capacity of the fuses is a max. 80% of their nominal current according to DIN 72581/Part 3 (for an surrounding air temperature of 23°C). Selecting the correct fuse cartridge is important for prod uct safety within applications, as well as for fuse cartridge service life and reliability. Fuse cartridges will only operate perfectly as protection components (break-off point) if they are properly selected and used as intended (i.e., according to the state of the technology and valid specifi cations, as well as data sheet characteristics), according to basic safety requirements (i.e., persons, animals and property must be protected against hazards).

– 2 – 4 – 6 – 8 – 10 – 13 – 16 – 19 – 22

With regard to product safety, fuse cartridges must gener ally be tested both under normal and faulty operating con ditions within your application.

WAGO Rail-Mount Terminal Blocks TOPJOB® S

109