Scame Industrial Connectors Catalogue

OPTIMA-METAL Series

MAXIMUM CONDUCTOR AND CABLE SIZES Section (mm 2 ) HDAL250 / HDAS250 HDAL500 / HDAS500 HDAL800 / HDAS800 A B C D E F A B C D E F A B C D E F 50 3P+E 4P+E M5 M5 50 50 29 24 Ø10,8 Ø10,8 Ø14 Ø14 17 14 M8 52 24 Ø10,8 Ø14 21 70 3P+E 4P+E M5 M5 50 52 29 29 Ø13 Ø13 Ø17 Ø17 17 14 M8 56 29 Ø13 Ø17 21 95 3P+E 4P+E M5 55 30 Ø15 Ø19 17 M8 60 32 Ø15 Ø19 21 120 3P+E 4P+E M8 64 35 Ø16,5 Ø21 21 150 3P+E 4P+E M8 64 35 Ø18,5 Ø22,5 21 185 3P+E 4P+E M8 62 32 Ø21 Ø25 21 240 3P+E 4P+E M8 76 43 Ø23 Ø28 21 M10 74 43 Ø23 Ø28 28 300 3P+E 4P+E M10 80 49 Ø27 Ø33 28 Cable outside diameter (mm) min max A Sheathing stripping lengh (mm) Phases B Insulation stripping lengh (mm) A B HDAL250 / HDAS250 (60°) 32 60 110 150 HDAL500 / HDAS500 (ANGLED HANDLE) 45 80 160 220 (see table page 7, mark C) HDAL500 / HDAS500 (STRAIGHT HANDLE) 45 80 200 210 HDAL800 / HDAS800 52 100 145 145

MICROSWITCH

HDAL250, HDAL500 and HDAL800 sockets can be equipped with a microswitch for information transmission.

OPTIMA-METAL HDAL250: 4Nm

OPTIMA-METAL HDAL500: 20Nm

OPTIMA-METAL HDAL800: 25Nm

CRIMPING INSTRUCTIONS Insert the cable into the cable terminal and crimp the cable using a hexagonal crimping tool with the jaw adapted to the cable section. LOCKINGS

CABLE CONNECTION

Thread the cable terminal into the male or female contacts and tighten by a wrench torque using the tightening torque (see table on the side)

HDAL type can be equipped with different type of lockings avoiding use of the connectors by people not allowed. Available an additional satty key.

Back terminals dimensions

EN 60529

Inserts: Thermo-hardening moulded plastic Contacts: Silver plated copper alloy Screws and fastenings: Stainless steel Seals: Neoprene

MECHANICAL CHARACTERISTICS LIST OF MATERIAL USED Protection degree: IP67 Casings: Corrosion proof tempered cast aluminium Fastenings: Stainless steel Casings: Corrosion proof tempered cast aluminium

EN 60309-1

Part 1: General requirements

Socket

Straight plug

Appliance inlet

Connector

Degrees of protection provided by enclosure.

ASSISTED CONNECTORS REFERENCE STANDARDS

HDAS TYPE VERSIONS

Plugs, socket outlets and couplers for industrial purposes.

Ambient temperature range: -30°C / +60°C

Mechanical shocks withstand: IK10

Socket

Plug

Connector

Reversed socket

AVAILABLE ON REQUEST Reversed plug

AVAILABLE ON REQUEST

HDAL TYPE VERSIONS

OPTIMA-METAL Series

HDAL and HDAS Type