Scame Industrial Connectors Catalogue

Switched interlocked sockets outlets OMNIA Series

Rated voltage >50V >> Without fuse carrier >> Surface mounting

OMNIA Series 505.

1.3

IP66/IP67

INTERLOCKED SOCKET IP66/IP67

136x125mm

136x275mm

Poles

Hz

Volt

Colour h

16A

32A

63A

505.1670 505.1683 505.1678 505.16836 505.16833 505.16832 1 505.16834 2 505.16838 2 505.1672 505.1674 505.1686 505.16864 505.16866 505.16867 3 505.16865 505.16861 1 505.16862 1 505.1679 505.1675 505.1687 505.16874 505.16876 505.16877 3 505.16875 505.16872 1

505.3270 505.3283 505.3278 505.32836 505.32833 505.32832 1 505.32834 2 505.32838 2 505.3272 505.3274 505.3286 505.32864 505.32866 505.32867 3 505.32865 505.32861 1 505.32862 1 505.3279 505.3275 505.3287 505.32874 505.32876 505.32877 3 505.32875 505.32872 1

505.6370 505.6383 505.6378 505.63836 505.63833

100-130V 200-250V 380-415V 480-500V TST>50V

4h 6h 9h 7h 2h 3h 8h 4h 9h 6h 3h 7h 5h 2h 4h 9h 6h 3h 7h 5h

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

1/6

50Hz 60Hz

2P+E

12h

>300-500Hz

>50V

505.63834 2

>50-250V

DC

>250V

505.6372 505.6374 505.6386

100-130V 200-250V 380-415V 480-500V 600-690V 440-460V 100-130V 208-250V 346-415V 480-500V 600-690V 440-460V >50V

1/6

50Hz 60Hz

380V 50Hz / 440V 60Hz

505.63866 505.63867 3 505.63865

3P+E

60Hz

11h 10h

100-300Hz >300-500Hz

505.6379 505.6375 505.6387

1/6

1/6

50Hz 60Hz

380V 50Hz / 440V 60Hz

3P+N+E

505.63876 505.63877 3 505.63875

60Hz

11h

>300-500Hz

>50V

2h

6 1 The maximum amount of current available, taking into account the maximum overheating temperature allowed by the relevant standards, must be downgraded with respect to the nominal current by 25% for products with frequencies ranging above 100 Hz; contact Scame Technical Service for further information. 2 When using DC we recommend that you make sure of implementing the protection scheme that is most suitable for the system involved; contact Scame Technical Service for further information. 3 Pay special attention when selecting the appropriate fuse with respect to the tension of the installation. - Supplied with stainless steel fixing screws. - Note: in case of mounting with ADVANCE2 System, use METRIC drilling point mark. - Blank side with drilling point mark

101