SLV Big White Brochure 2022

CUSTOMER INFORMATION

Information regarding light housing heat generation Halogen lamps operate at high temperatures and can lead to the heating of the housing of the light fixture. They should therefore only be touched once the housing has cooled down. Adjustable lights and light heads that do not feature insulated positioning levers, or which exceed the maximum permissible hous- ing temperature at the positioning point when operated at maximum wattage, should also be mounted out of reach. LED retrofit lamps offer a low-tempera- ture alternative to most of our halogen lights.

Please note: A large part of the products shown in this catalogue are protected by trade- marks, registered designs, utility models or patents. Any violation of these property rights or the use of text and layout design or copyrighted images without our authorisation will be prosecuted. The illustrations and information contained in this catalogue are for illustrative purposes only and are not legally binding in terms of colour, shape, design or technical details. All product descriptions and specifications are subject to alteration and errors. All of the products in our range are subject to our strict quality assurance procedures and comply with generally applicable standards. This catalogue contains a general range and is not country specific. Any deviations from country-specific guidelines must be clarified before ordering. SLV cannot be held responsible for any deviations in terms of technical standards. All weights and dimensions are given in kg and cm respectively unless stated otherwise. We reserve the right to make technical alterations. The presentation of our lights with realistic photos showing examples of use is possible thanks to the kind cooperation and agreement of the owners or designers of the environments depicted in the images. We would like to take this opportunity to thank all those who contributed to the creation and use of our photos by giving their consent. With the appearance of this catalogue, the prices stated in previous lists and catalogues are rendered invalid. SLV has the right to adapt the relevant price list in line with changes in market conditions, in the event of substantial changes in procurement costs or similar circumstances.

Luminous flux The total amount of light produced by a light source is given in lumens (lm).

Luminosity The luminosity is the luminous flux indicated per solid angle and is expressed in candelas (cd). Colour rendering index The colour rendering property of a light source is indicated by the Colour Rendering Index (CRI). A CRI of 80 or higher is required for light sources used indoors. Light sources used outdoors must have a CRI of at least 65.

Colour temperature The colour temperature of a light source is indicated in K (Kelvin).

Standard LED This is the classic version of the LED (3 mm or 5 mm LED). These were originally developed for indication purposes, e.g. in instrument panels. Standard SMD LED SMD means "Surface Mounted Device". This is a compact LED that is soldered directly onto the circuit board without wire connections. SMDs are available in different sizes and are suitable for lighting purposes. PowerLED PowerLED is a high-performance LED with a power of 1W or more. It places increased demands on current constancy and should therefore always be op- erated with constant current sources. If you with to connect several LEDs, they must therefore be connected in series. A parallel connection is not permitted. Please ensure that you observe the installation sequence so that the LEDs are not exposed to high current for a short time, which could damage them. Ultimately, the following rule applies: first you should completely connect the secondary circuit (LEDs to driver), then you should close the primary circuit (driver to power source). Chip On Board LED (COB LED); Large surface LED This is an LED with an exceptionally flat shape. The advantage of COB LEDs is good heat dissipation when technically implemented with cooling surfaces, which enables high light output and a long lifespan. Stainless Steel 304 (1.4301) Good resistance to corrosion is shown in natural environmental media (water, urban and rural atmosphere) in the absence of significant chlorine and salt concentrations. 1.4301 is, however, not suitable for use in areas where there is contact with seawater, salt water or a salty atmosphere, or for use in swimming pools or similar contexts. Stainless Steel 316 (1.4404) In natural environmental media (water, urban and rural atmosphere) as well as in industrial areas with moderate chlorine and salt concentration, in the food and pharmaceutical industry and in the agricultural food sector, 1.4404 shows excellent resistance to corrosion. 1.4404 is not resistant to seawater.

All prices are recommended retail prices (GBP) and indicated in Euro without VAT.

Publisher SLV GmbH, Germany Daimlerstrasse 21-23 52531 Uebach-Palenberg T +49 2451 4833 - 355 slv.com

Copyright © SLV GmbH, 2021

Image credits SLV GmbH External photographers: Andreas Fein, Anja Lynen, Gerd Arnolds, Günther Preissler, Marc Derkum, Dirk Hoffmann