Lutec Lighting 2020

Passive infrared (PIR) motion sensor How does it work?

A PIR sensor detects changes in the amount of infrared radiation and converts this changes into a switch-on signal.

When a person makes a movement within the detection

radiation in between the person’s body and the environment.

Comfortable detection area The detection area is a combination of the reach in distance and angle. An adjustable sensor can be tilted and/or turned and gives you full freedom.

180°

2,5 meter

6-18 meter

Your personal settings Time setting

As from the moment the sensor detects a movement the light stay on from 10 seconds upon 8 minutes according your preference. Twilight setting The environment brightness can be adjusted according your selection from night (10 lux) to daylight. In this way the light will switch into the “ON” position according the selected outside light level and not during the day. Distance setting You can limit the detection distance in accordance with the desired detection area. In this way you can avoid a movement detection outside your private grounds. For your convenience Dusk to dawn Automatic light on switching as soon it’s dark outside Ambient Light Light stays on all night long in a gentle ambient light, after movement detection the light switches on a powerful light beam. Double sensor Assures you a full detection not only frontal but also underneath the luminaire close to the wall. Test mode You can define the perfect detection area during installation in daylight situation

How to choose? Check in a few steps which InMotion Security Sensor Light suits the best for your home situation.

BASED ON SENSOR DETECTION REACH

XX°

2,5 meter

xx meter

DETECTION DISTANCE

ADJUSTABLE SENSOR

FIXED

DETECTION ANGLE

TURN

WIDE 120°

LARGE 12-15M

X-WIDE 180°

TILT & TURN

X-LARGE 18-25M

BASED ON LUMINAIRE CHARACTERISTICS

LUMINAIRE TYPE

LIGHT OUTPUT

LIGHT HEADS

POWERFUL 800 - 1500 LUMEN

MOVEABLE YES OR NO

WALL LIGHT

1 OR 2

X-POWERFUL 1700 – 3200 LUMEN

FLOOD LIGHT