Levello Plaster-In Downlights Catalogue

Why Levello?

Invisible by Design – When not illuminated, most downlights have an unsightly bezel; install a number of them and the ceiling takes on the appearance of an airport runway or a bad case of acne. Levello’s patented, magnetic flush mounting system allows the front plate to be completely level with the ceiling, avoiding the runway effect. Also available in a paintable version, the front plate can be finished with the same paint to match the ceiling or wall so it blends in perfectly. Infinite Possibilities – Levello uses a housing which is fitted permanently into the ceiling, different styles of fittings or ‘inserts’ are placed in the housing and held in by magnets, a front plate completes the flat finish. As a result, Levello is versatile, allowing the user to change a downlight, to a pendent, to a spot light or even blank out the position completely in seconds. Just decide if the product needs to be fire rated or not and the choice is endless. By a Different Light – Levello’s modular system will accept any industry standard 50mm diameter (MR16) lamp style, future proofing installations as lamp technology evolves. The LOW PROFILE products will accept a beam shaping or colour changing lens or filter, PLUS products will accept up to three of these accessories, letting you completely customise the effect. Easy Living – Even with modern LED lamps, changing a lamp becomes inevitable, at best this often involves a face full of dust, at worst a damaged ceiling (not to mention broken fittings). Levello completely eliminates all the inconvenience of changing a lamp whilst maintaining the integrity and finish of the ceiling. Only Levello – Offers a Fire Rated IP65 directional downlight - as standard; attention to detail such as black or white sleeve colours on directional downlights, mark out the quality of our products. The installation process has been designed to reduce the time and cost of finishing your project to the highest standard. All in an Elegant Package – Manufactured in the UK and supplied complete in stylish packaging with simple installation instructions printed on the lid. Factory assembled connectors ensure speedy installation and testing, enabling the user to swap their fitting with ease and ensures the safety of the installation. Products can be supplied as ‘first fix’ and ‘second fix’ kits reducing the risk of lost or damaged products on site while allowing last minute changes to be accommodated with ease.

3