Levello Plaster-In Downlights Catalogue
Drop Pendent Inserts Set
The flexibility of Levello is amply demonstrated by the ability to swap out a downlight for a pendent. This is achieved with our pendent bridge, which is inserted through the housing and into the ceiling void, resting on the upper surface of the ceiling. The pendent cord hangs on top of the bridge anchored by a cord grip. Installation is quick and easy with our connectors, eliminating tricky connections at height. Pendent kits can take a maximum weight of 5 Kg. To keep ordering simple we only supply the DROP range of products as “inserts” and therefore housings need to be ordered separately (see table below or page 26). Products with paintable plates come as a kit of parts which require assembly; as the front plate needs to be painted before the cable is passed through it. Assembly of the kit is straightforward.
STEP 1 - Select the required Housing
Non Fire Rated
Pack Quantity
Fire Rated
10
LE1000
LE1200
Housing with Mains Connector and protective disks
LE1005
LE1205
Downlight replacement housing
1
STEP 2 - Select product from our Drop range
Pendent Sets are available with Bayonet or Eddison Screw lampholders. The set includes a pendent bridge, a lampholder, front plate and a mains connector. Paintable versions come as a kit which needs to be assembled. Pendent Sets
Powder Coated
Paintable
LE5000
LE5000P
Pendent set B22 lampholder, with 300mm white cord
LE5001
LE5001P
Pendent set E27 lampholder, with 300mm white cord
The Pendent Conversion Kit allows you to convert any 3rd party pendent into your own ‘Levello Pendent’, the only limitation is that it cannot weigh more than 5 Kg. The conversion is quick and simple and fitting the pendent could not be easier. The conversion kit comes with a bridge, cable strain and a mains connector. Pendent Conversion Kit
Powder Coated
Paintable
LE9040
LE9040P
Pendant conversion kit (for self-assembly supplied without pendent)
16
Levello, Basepoint, Great Marlings, Luton, LU2 8DL Tel +44 1462 768 220 levello.net
Made with FlippingBook Publishing Software