Lapp Cables 2021 Catalogue

Tools and cable accessories Connection and crimping • Pressing pliers for CU connections

ÖLFLEX ® ACCESSORIES FLEXIMARK ® SILVYN ® SKINTOP ® EPIC ® HITRONIC ® ETHERLINE ® UNITRONIC ® APPENDIX

PVX 1300 pressing pliers battery-operated

Info I

• NEW: two-stage DUAL crimping techniq ue (first hexagonal pressing, then additional mandrel pressing)

Benefits • Pressure strength control using pressure monitoring • Buzzing signal and flashing light if right pressure is not achieved • Display with information on the tool and service interval • Single-handed operation for easy handling • Rapid feed for more efficient crimping Application range • Battery powered crimp tool for crimping of CU terminals KRF/KRT 10-400 mm 2 • Same accessories as V1311-A pliers

Product features • Crimps/charge: 60-120 depending on size and temperature • Battery type: Makita 5 Ah • Charging time: 40 min Included • Supplied with robust plastic case, battery charger and instruction manual • Pressing dies and die holders need to be ordered seperately

Technical data

Classification ETIM 5/6 ETIM 5.0/6.0 Class-ID: EC000168 ETIM 5.0/6.0 Class-Description: Crimp tool cable lugs, cable end sleeves, screen connection Note Crimping pr ofile: DUAL (hexagonal + mandrel) or hexagonal Pressing force: 124 kN (13 t)

Article number

Article designation

PVX 1300 pressing pliers battery-operated 61813872

Crimping tool PVX 1300

Photographs and graphics are not to scale and do not represent detailed images of the respective products.

Accessories • Die holders for system 1311 refer to page 981

• Dies for system 1311 and 1300 refer to page 982

Die holders for system 1311

Application range • Both the inner die holder V1316 and the outer die holder V1318 is needed Note • Only needed for dies which have no „13“ in article designation Suitable tools • V 1311-A pressing pliers, hydraulic refer to page 980 • PVX 1300 pressing pliers battery-operated refer to page 981

Technical data

Classification ETIM 5/6 ETIM 5.0/6.0 Class-ID: EC001282 ETIM 5.0/6.0 Class-Description: Insert for crimp tool cable lugs, cable end sleeves, screen connection

Article number

Article designation

Dies per PU

PU

Die holders for system 1311 61795941

V 1316 inner die-holder V 1318 outer die-holder

1 1

1

61795942 1 Component composition: First specify the pressing dies. Note that die holders are not needed for all pressing dies (depending on the cross section of the tube cable lugs to be pressed) Photographs and graphics are not to scale and do not represent detailed images of the respective products.

981

For current information see: www.lappgroup.com