Lapp Cables 2021 Catalogue

Data communication systems Low frequency data transmission cables • UL/CSA-cer tified

306 ÖLFLEX ® ACCESSORIES FLEXIMARK ® SILVYN ® SKINTOP ® EPIC ® HITRONIC ® ETHERLINE ® UNITRONIC ® APPENDIX 301802 302015 302210 302215 302410 302020 302025 302204 302220 302225 302006

UNITRONIC ® 300 / UNITRONIC ® 300 S Control and signal cables with small cross sections - UL/CSA listed

Info I

• Designation of shielded version: Formerly "UNITRONIC ® 300 CY", now "UNITRONIC ® 300 S" • Other sizes on request • Especially for 20 AWG and 18 AWG: With standard core color code, up to 60 conductors producible/ With non- standard color code, e.g., green-yellow grounding conductor, up to 100 cores

Benefits • Wide application range due to multiple certifications • Cost-saving, easy installation due to omission of closed raceways (suitable for open wiring) Application range • Control and signal cables for internal and external wiring • For the North American market • On the basis of CMG, PLTC or ITC direct laying on cable tray in the USA, in conjunction with -ER (Exposed Run) for unprotected transition sections with a length of not more than 6 ft. each • Thanks to the DIRECT BURIAL approval, direct burial of versions with the nominal conductor cross sections 18 AWG and 16 AWG is normatively permitted in the USA • Torsion resistant up to ±150 °/m for the drip loop of wind turbine generators

Product features • Oil-resistant according to UL OIL RES I • Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG) Norm references / Approvals • USA: (UL) CMG [E130334], (UL) PLTC-ER (18 AWG + 16 AWG) [E216027], (UL) PLTC (>24 AWG) [E216027], (UL) ITC-ER (18 AWG + 16 AWG) [E196134], UL AWM Style 2464 [E100338], DIR BUR (18 AWG + 16 AWG) • CAN: c(UL) CMG FT4 [E130334], CSA AWM I/II A/B FT1 Product Make-up • Fine-wire strand made of tinned-copper wires • Core insulation made of PVC compound • UNITRONIC ® 300 S: with overall foil tape wrapping, drain wire, tin-plated copper braiding (75 % coverage) • Outer jacket: Specially Formulated PVC • Color of the outer jacket: Dark gray (similar to RAL 7005)

Technical data

Classification ETIM 5/6 ETIM 5.0/6.0 Class-ID: EC000830 ETIM 5.0/6.0 Class-Description: Data cable Core identification code refer to Appendix T9 Conductor stranding Fine wire Torsion movement in WTG TW-0 & TW-2, refer to Appendix T0 Minimum bending radius During installation: 4 x cable diameter Screened: 6 x outer diameter Nominal voltage according to UL: 300 V IEC: not for power transmission Test voltage 1500 V Temperature range Occasional flexing/ North America: -25°C to +105°C (AWM for USA: +80°C) Fixed installation/ North America: -40°C to +105°C (AWM for USA: +80°C)

Article number UNITRONIC ® 300 301602

Article designation

Number of cores and AWG size Outer diameter [mm]

Copper index (kg/km)

Weight (kg/km)

UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 UNITRONIC ® 300 S UNITRONIC ® 300 S UNITRONIC ® 300 S UNITRONIC ® 300 S UNITRONIC ® 300 S UNITRONIC ® 300 S UNITRONIC ® 300 S UNITRONIC ® 300 S UNITRONIC ® 300 S UNITRONIC ® 300 S

2 x AWG16 2 x AWG18 6 x AWG20 15 x AWG20 20 x AWG20 25 x AWG20 4 x AWG22 10 x AWG22 15 x AWG22 20 x AWG22 25 x AWG22 10 x AWG24 2 x AWG16 6 x AWG16 2 x AWG18 3 x AWG18 4 x AWG18 25 x AWG18 2 x AWG20 4 x AWG20 6 x AWG20 6 x AWG22

6.7 6.1 7.5

25

83 61 97

18.3 29.5 73.7 98.1

11.5 12.6 14.1

178 259 354

122.6 13.7 34.9

5 7

33 67 91

7.9

51.3 68.5 85.6 21.4

9

116 180

10.5

6.4

51

UNITRONIC ® 300 S 301602S

7.6 9.9 6.8 7.3 7.9 6.3 7.3 8.4 6.4

50.6

101 210

301606S 301802S 301803S 301804S 301825S 302002S 302004S 302006S 302206S

105.7 37.2 49.1 59.6 28.3 40.2 55.1 35.7 278.4

75 85

104 448

16.8

60 88

119

68

Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges. Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths / Packaging size: Coil 152 m; Drum 305 m Photographs and graphics are not to scale and do not represent detailed images of the respective products. Similar products

Accessories • SKINTOP ® ST-M refer to page 680 • SKINTOP ® ST-M Small PU • UNIVERSAL STRIP stripping tool refer to page 963 • STAR STRIP stripping tool refer to page 957

• ÖLFLEX ® TRAY II refer to page 60 • ÖLFLEX ® TRAY II CY refer to page 61 • ÖLFLEX ® POWER MULTI refer to page 62 • UNITRONIC ® 300 STP refer to page 307

For current information see: www.lappgroup.com