Kosnic Evolve 9

Ossa 3 LED Bulkhead

Hinged LED tray The LED tray is hinged to the base of the bulkhead. This is for the convenience of installation and maintenance.

Easy release The LED tray is simply released by pushing the clip to the side. The spring at the back of the LED tray pushes the tray up automatically.

Diffusing optic lens Using ultra-wide LED lenses (170°) provides an even shadow-free light output at the front of the diffuser.

Clip-on trims

This range offers a large variety of clip-on trims, for both interior and exterior applications.

Plug-in Sensor The Sensor can be plugged into the slot at the back of the LED Tray. This sensor has a PWM dimming output that supports corridor and dusk to dawn function

M20 Slot Cutting mark of M20 conduit entry can be found at the inner side of the clip-on trims.

Conduit & BESA box entry 4 M20 conduit entry positions are located at the side of the base. A BESA box entry and mounting position is located at the back of the base.

Lulu Microwave Sensor

Like many of the Kosnic surface luminaires, Ossa 3 take the Lulu microwave sensor that is configured and controlled by the universal remote.

Plug-in 2 in 1 emergency module This DD emergency module can be easily pushed into the mounting clips at the base. it can be switched between manual and self-test, using a dip switch on the module.

Dusk to dawn

Corridor Office Toilet

Scene

1 2 1 2 1 2 1 2

Detection area

100% 50% 25%

<30Lux ON, >150Lux OFF

Hold time 1 min 30 min 5 min

Daylight sensor

100Lux 300Lux Disable

+44 (0) 1635 523 713

173