Integral LED Brochure 2023 - Edition 12

LED Drivers

Multiport Driver and Sensor Quickly get a fabulous and Smart controlled strip and light installation without wiring or tools

5 or 7 Connection Port Drivers (12V or 24V constant voltage) for appropriate LED strips and lights Install without a Sensor if required Plug in the driver and add one or up to 5/7 LED strips or lights. With no sensor, the lights are controlled by the driver being on or off. Install a Master Sensor to control all the connected strips and lights Connect a master sensor (see options) to the driver to control all the connected strips and lights in sync. e.g, If a handwave sensor is installed in a kitchen project, all connected strips and lights are turned on and off with a handwave. Install Channel Sensors to control each port individually. Connect suitable channel sensors (see options) in line with each power port. (With no Master sensor fitted*). The strips and lights are separately controlled. e.g., If a Turn on/off and a door sensor are installed in a cabinet project. The strips • 12V and 24V • Uses DuPont 2.54mm standard connectors • Variety of sensors to smarten up your lights! Install multiple LED strips and/or low voltage lights with an easy-to-install plug-and-play driver and the option to be controlled by one or more separate sensors.

Applications: A perfect solution for kitchens, displays, furniture, cabinets, and a range of other applications

or lights above the cabinet can be switched on and off (or dimmed if appropriate), and strips and lights in the cabinet can be switched on or off by the door sensor when door is opened or closed. Install more strips or lights with a six-port channel splitter Splitter ports can be added to the driver to increase the number of strips and lights installed (in conjunction with the total wattage) Install an accessory that is usually connected to a driver (for 7+1 channel port versions) An accessory to control all channels can be added to increase the functionality. e.g, a Smart RGB controller can be added to maximise the effects of RGB strips.

Effortlessly connect with extension lead and strip connector options (see options)

Master and Channel Sensor options

PIR Motion Sensor

*Please never use Master and Channel sensors in conjunction, risk of immediate Channel sensor failure

130

For the full specification go to www.integral-LED.com