ESP Fire & Security Products

ADDRESSABLE FIRE SYSTEM DEVI CES

ADDRESSABLE FIRE SYSTEM DEVI CES

Q Sensitivity level selectable from the control panel High/Normal/Middle/Low Q Protected area - 120m2 Q Installation height - up to 16m Q Day/Night mode Q Low profile design Q LED indication with 360° visibility Q Certified to EN54-7 Q Base ordered separately see MAGPRO-DB, MAGPRO-DBS and MAGPRO-DBS MAGPRO-SD1 Addressab l e Smoke Detector

MAGPRO-HD1 Addressab l e Heat Detector

Q Can work as a fixed temperature or rate of rise detector Q Class A1R, A2S, BS selectable from the control panel Q Day/Night mode Q Protected area - up to 35m2 Q Installation height - up to 7.5m Q Low profile design Q LED indication with 360° visibility Q Certified to EN54–5 Q Base ordered separately see MAGPRO-DB, MAGPRO- DBS and MAGPRO-DBS Q Sensitivity selectable from the control panel -High/ Normal/Middle/Low Q Class A1R temperature sensor (according to EN54-5) MAGPRO-HSD1 Combined Smoke & Heat Detector

*Recommend a Boxed Power Supply with battery backup

MAGPRO-REP Addressab l e Repeater Pane l

Made in EU

EN54

Q Wall-mount design Q Only compatible with MAGPRO16 Ver2.8 and higher Q Compatible with MAGPRO96 Q Requires 24VDC External Power Supply Q Max consumption of 0.11A (110mA) Q Each panel in network will require a MAGPRO-NIC Q Maximum of 32 panels in the network Q 1000m distance from MAGPRO-REP to MAGPRO Panel Q Dimensions 200 x 330 x 48mm Q Ring type network Q 10,000 event log within the repeater

Power From a MAGPRO Panel

AUX / GND

External*

24VDC +/-4 VDC

Consumption Input Communication Output Communication Technical spec Memory LOG

110mA

RS485 1000m

Max Length Between Panels

RS485 1000m

Max Length Between Panels

Q Protected area - up to 120m2 Q Installation height - up to 16m

10,000 events

Network type Ring MAGPRO16 Firmware Compatibility Ver 2.8 or higher MAGPRO96 Firmware Compatibility Ver 4.2 or higher Max number of panels 32 Connection to MAGRO Panel Via MAGPRO-NIC Environment Working Temperature -10°C to +50°C Humidity 0.95 Weight 770g Dimension 200 x 330 x 48mm

Q Day/Night mode Q Low profile design Q LED indication with 360° visibility Q Certified to EN54–5/7 Q Base ordered separately see MAGPRO-DB, MAGPRO-DBS and MAGPRO-DBSS

MAGPRO-NIC NETWORK INTERFACE CARD Q Networks between MAGPRO16/96 & REP Panels Q MAGPRO16 Firmware REV 2.8 or higher Required Q MAGPRO96 Firmware REV 4.2 or higher Required Q RS-485 Communication protocol

Q On-board LED indication Q Power supply from the panel Q Programming from the panel Q 1000m transmission distance between modules

MAGPRO-DB Detector Base

MAGPRO-DBS Sounder Base

MAGPRO-DBSS Sounder Strobe Base

MAGPRO-DBSC Detector Base Cover Blank Plate

130

131