ESP Fire & Security Issue 29
ADDRESSABLE FIRE SYSTEM DEVICES
ADDRESSABLE FIRE SYSTEM DEVICES
Q Sensitivity level selectable from the control panel High/Normal/Middle/Low Q Day/Night mode Q Low profile design Q LED indication with 360° visibility Q Certified to EN54-7 Q Base ordered separately see MAGPRO-DB, MAGPRO-DBS and MAGPRO-DBS MAGPRO-SD1 Addressable Smoke Detector
MAGPRO-HD1 Addressable Heat Detector
Q Can work as a fixed temperature or rate of rise detector Q Class A1R, A2S, BS selectable from the control panel Q Day/Night mode Q Low profile design Q LED indication with 360° visibility Q Certified to EN54–5 Q Base ordered separately see MAGPRO-DB, MAGPRO DBS and MAGPRO-DBS
*Recommend a Boxed Power Supply with battery backup
MAGPRO-REP Addressable Repeater Panel
Made in EU
EN54
Q Wall-mount design Q Only compatible with MAGPRO16 Ver2.8 and higher Q Compatible with MAGPRO96 Q Requires 24VDC External Power Supply Q Max consumption of 0.11A (110mA) Q Each panel in network will require a MAGPRO-NIC Q Maximum of 32 panels in the network Q 1000m distance from MAGPRO-REP to MAGPRO Panel Q Dimensions 200 x 330 x 48mm Q Ring type network Q 10,000 event log within the repeater
Power From a MAGPRO Panel
Q Sensitivity selectable from the control panel -High/ Normal/Middle/Low Q Class A1R temperature sensor (according to EN54-5) MAGPRO-HSD1 Addressable Combined Smoke & Heat Detector
AUX / GND
External*
24VDC +/-4 VDC
Consumption Input Communication Output Communication Technical spec Memory LOG
110mA
RS485 1000m
Max Length Between Panels
RS485 1000m
Max Length Between Panels
Q Day/Night mode Q Low profile design Q LED indication with 360° visibility Q Certified to EN54–5/7 Q Base ordered separately see MAGPRO-DB, MAGPRO-DBS and MAGPRO-DBSS
10,000 events
Network type Ring MAGPRO16 Firmware Compatibility Ver 2.8 or higher MAGPRO96 Firmware Compatibility Ver 4.2 or higher Max number of panels 32 Connection to MAGRO Panel Via MAGPRO-NIC Environment Working Temperature -10°C to +50°C Humidity 0.95 Weight 770g Dimension 200 x 330 x 48mm
MAGPRO-NIC NETWORK INTERFACE CARD Q Networks between MAGPRO16/96 & REP Panels Q MAGPRO16 Firmware REV 2.8 or higher Required Q MAGPRO96 Firmware REV 4.2 or higher Required Q RS-485 Communication protocol
Q On-board LED indication Q Power supply from the panel Q Programming from the panel Q 1000m transmission distance between modules
MAGPRO-DB Detector Base
MAGPRO-DBS Sounder Base
MAGPRO-DBSS Sounder Strobe Base
MAGPRO-DBSC Detector Base Cover Blank Plate
160
161
Made with FlippingBook Online newsletter creator