Collingwood Lighting Essentials 2023

Emergency bolt-on & PIR bolt-on sensors

The bolt-on’s convert your Uniform linear or Borealis batten into an emergency, dimming or motion sensor. The PIRBOLT allow the user to set up on/off control or PIRBOLTDIM allows two step-dim parameter.

EMBOLT...

PIRBOLT

PIRBOLTDIM

Install as high as 6m high. Up to 6m high Fast 4 minute conversion time. Quick attachment M20 interface for easy installation. Easy attachment

Save energy and money. (PIR bolt-on only) On/Off PIR control & daylight switching Long lasting battery. (Emergency bolt-on only) LiFePO4 with 2-year guarantee

20mm Cable entry

BESA mounting options

There are conduit/cable gland entry points from either side and the back of the fixture, which enables this product to satisfy many installation requirements, giving the option to conceal wiring behind the fixture or link them together via their loop-in loop-out terminal.

The battens can be mounted either directly on the surface, through the pre-drilled holes on the base of the fitting, or suspended via a hanging kit. The gear tray is can be removed entirely or it can be suspended from the base, whilst you work to mount. Surface mounted

Rear cable entry

Side cable entry

Suspended

Borealis suspension kit - Product code: BTSK1 Uniform CSP suspension kit - Product code: UNISUS2M

67