Collingwood 2022 Brochure

For your installation Choosing the ideal track & components.

Using the below information, create the ideal grid for your track lighting.

Retail displays are constantly evolving. The flexible nature of track lighting ensures that merchandise will remain beautifully lit wherever displays are positioned. The lighting can be moved along a purpose-built grid with the ability to rotate and tilt, ensuring ultimate flexibility. When building a grid, it’s important to consider where the majority of your merchandise will be displayed. All of our track lighting rotates 355°, and we recommend two track set-up options as shown in diagrams A and B below.

If the majority of merchandise is displayed on walls or outside the area of your grid, you will need to assemble an ‘ outside ’ grid.

If the majority of merchandise is displayed under the grid, you will need to assemble an ‘ inside ’ grid.

Outside grid

99.5mm

62.25mm

62.25mm

L - connector

1

Use for corners. See page 327 for partcodes.

1

2

1

T - connector

2

T - connector (mirrored) Use to create a T-junction. See page 327 for partcodes. Use opposite T-connector. Use to create a T-junction. See page 327 for partcodes. Use opposite T-connector mirrored.

2

4

3

99.5mm

3

X - connector

4

Use to join a cross section. See page 327 for partcodes.

2

4

3

End cap

5

Completes the track. See page 327 for partcodes.

Connector end feed

6

Connects the grid to the mains. See page 327 for partcodes.

1

3

5

6

324

Made with FlippingBook Ebook Creator