Click GridPro Brochure

Technical Specification

GridPro ® Modules

J38

J39

TYPICAL WIRING DIAGRAM

DIMENSIONS (MM)

24.5

GM2018NPWCH

GM2018NPWBR

GM2018NPWSC

GM2018NPWBS

SUPPLY

35

50

LOAD

20

GM2018NBKBN

GM2018NBKPN

GM2018NBKSB

MODULE BACK

20AX Double Pole Switch Modules with Neon GM2018NPW

Material Composition

Rocker Switch: Urea or Urea + Stainless Steel Cover (Ingot) Cover, Insert & Rear Housing: Nylon Terminals: Brass, Terminal Screws: Steel & Yellow Passivated Silver “on-lay” Copper / Brass Contacts

20AX Double Pole Switch With Neon Module - White 20AX Double Pole Switch With Neon Module - Black

GM2018NBK

GM2018NPWBR GM2018NPWBS GM2018NPWCH GM2018NPWPN GM2018NPWSB GM2018NPWSC GM2018NPWSS GM2018NBKAB GM2018NBKBN GM2018NBKBR GM2018NBKBS GM2018NBKCH GM2018NBKPN GM2018NBKSB GM2018NBKSC GM2018NBKSS GM2018NGYBS GM2018NGYSC GM2018NGYSS

20AX Double Pole Switch With Neon Module - White - Polished Brass 20AX Double Pole Switch With Neon Module - White - Brushed Stainless 20AX Double Pole Switch With Neon Module - White - Polished Chrome 20AX Double Pole Switch With Neon Module - White - Pearl Nickel 20AX Double Pole Switch With Neon Module - White - Satin Brass 20AX Double Pole Switch With Neon Module - White - Satin Chrome 20AX Double Pole Switch With Neon Module - White - Stainless Steel 20AX Double Pole Switch With Neon Module - Black - Antique Brass 20AX Double Pole Switch With Neon Module - Black - Black Nickel 20AX Double Pole Switch With Neon Module - Black - Polished Brass 20AX Double Pole Switch With Neon Module - Black - Brushed Stainless 20AX Double Pole Switch With Neon Module - Black - Polished Chrome 20AX Double Pole Switch With Neon Module - Black - Pearl Nickel 20AX Double Pole Switch With Neon Module - Black - Satin Brass 20AX Double Pole Switch With Neon Module - Black - Satin Chrome 20AX Double Pole Switch With Neon Module - Black - Stainless Steel 20AX Double Pole Switch With Neon Module - Grey - Brushed Stainless 20AX Double Pole Switch With Neon Module - Grey - Satin Chrome 20AX Double Pole Switch With Neon Module - Grey - Stainless Steel

Voltage

250V~ 50Hz

Current Rating (A)

20AX

Terminal Size Torque Value

ø 5mm 1.2Nm

2 x 4mm 2 , 3 x 2.5mm 2 or 1 x 6mm 2

Cable Size (mm²)

Back Box Depth (mm)

25mm - 47mm (Deco ® , Deco Plus ® , Mode ® , Polar ™ ) 35mm - 47mm (Define ® , Definity ™ )

Double Pole

Yes Yes

Modular

Warranty (Years)

10 Years

Antimicrobial Certified

Yes (Non Ingot Switches Only)

IP Rating

IP20

-5 o C to +40 o C BS EN 60669-1

Operational Temperature

Standards

Additional Information: Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram supplied with the relevant product.

These products are rated at 20AX; therefore all terminals should not exceed the stated amperage. Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.

Standards: BS EN 60669-1 Back Box Depth (mm): 25 (35 Flat Plate) Cable Size (mm²): 3 x 2.5 or 2 x 4 Dimensions (mm): 24.5 (W) x 50 (H) x 22.5 (D)

All white moulded accessories are manufactured using Urea Formaldehyde, which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. All products independently tested have shown to have anti-viral properties against enveloped and non-enveloped viruses. A 99.99% kill off rate across all four types of the strains of bacteria - MRSA, E-Coli, Salmonella, Klebsiella Pneumonia and enveloped viruses and a 92% kill off rate against non-enveloped viruses.

CLICK ® WIRING ACCESSORIES

sales@scolmore.com | Call: 01827 63454 | scolmore.com