Bell Lighting Guide 2026

281

Bat-Friendly Lighting

Outdoor lighting should provide the visibility people need while protecting the surrounding environment. Carefully selected products, supported by considered lighting design, can help reduce disturbance to bats and limit light spill.

What makes lighting suitable?

• Protect dark habitats. Avoid illuminating bat roosts, access points, feeding areas and flight routes. Where bats may be affected, involve an ecologist early in the project. • Choose the right light source. Use warm light with limited blue content, supported by spectral data. Colour temperature alone does not establish whether a product is suitable. • Direct light where it is needed. Select appropriate optics, shielding and mounting angles to minimise glare, prevent upward light and keep illumination away from surrounding habitats. • Keep light levels appropriate. Use the lowest output needed for the task, with lighting calculations to check spill into sensitive areas. • Control operating hours. Use timers, dimming and presence detection where appropriate, switching lighting off when it is no longer required.

BELL products to consider

BELL’s spectral assessment identifies the following ranges at the colour temperatures shown. Final selection must also account for light distribution, installation position, controls and the ecological requirements of the site.

Product range

Assessed colour temperature

Catalogue Page

Skyline Powertron

3000K

18

Skyline Padel

2700K

28

Skyline Virtus CCT

3000K

32

Skyline Omni CCT

3000K

36

Muro

3000K

38

Lumo2 CCT

3000K

40

Cityline Rego CCT

3000K

42

Alto

3000K

44

Aqua Connect CCT

3000K

84

For Skyline Virtus and Skyline Omni, select the asymmetric versions for applications requiring controlled light distribution.

Support with your lighting scheme

BELL’s complimentary lighting design service can help you select products and plan lighting levels and distribution around your project requirements. Where bats are present, the design should follow the project ecologist’s recommendations. Suitability applies to the specified configuration and completed lighting scheme. Spectral assessment alone does not establish that an installation is bat safe.

3000K

Bat Safe

technical@belllighting.co.uk sales@belllighting.co.uk

Made with FlippingBook. PDF to flipbook with ease