Armeg Product Guide

HSM - High Speed Masonry Core Drills

HSM - High Speed Masonry Core Drills Part Numbers & Technical Information

Perfect for….. A rapid action core drill ideally matched to SDS Plus Machines

HSM - High Speed Masonry Core Drills

Diameter Size mm

Overall Length

Working Length

Part Number

mm

mm

25 30 40 45 50 66 80

85 85 85 85 85 85 85

60 60 60 60 60 60 60

CL25S CL30S CL40S CL45S CL50S CL66S CL80S

Unique Pilot System Unique Armeg original design ball locking & pilot drill system eliminates the need for awkward grub screws, meaning pilots and arbor can be interchanged quickly for greater convenience Precision Machined Arbor Flats Precision machined arbor flats allow users to easily use grips or a spanner to lock on to the arbor for easy separation of core assembly Tommy Bar Hole Machined Tommy Bar hole allows users to locate a Tommy Bar for hassle free disconnection of arbor and core drills Extremely Thin Wall Manufactured with only a 2.5mm ultra thin wall, there is dramatically reduced drag when drilling meaning the HSM’s drill with extreme speed Ultra Hard Tungsten Carbide Tips Ultra hard tungsten carbide tips provide increased wear resistance allowing users to operate the core on ‘hammer action’ for rapid drilling speeds

A

DID YOU KNOW?

The HSM range was originally produced in response to greater use of lighter masonry building

A

materials where Professional Heavy Duty Cores can be overly powerful. Their popularity rocketed when SDS Plus hammer drills became industry standard

HSM - High Speed Masonry Core Drill Accessories

B

Description

Shank Type

Thread Type Working Length mm

Part Number

B

7mm HSM Pilot Drill

Ball retention groove

-

100

CLPDS

200mm HSM Tommy Bar

n/a

-

200

CLTB

C

High Speed Masonry Cores can be used in: • Heavy duty concrete • General concrete

100mm SDS Plus Arbor HSM Cores

SDS Plus

M16 x 2.0

100

DL100B4S

300mm SDS Plus Arbor HSM Cores

SDS Plus

M16 x 2.0

300

DL300B4S

C

100mm Hex Arbor HSM Cores

10mm Hexagon

M16 x 2.0

100

DL100X13S

• Hard bricks • Soft bricks • Lightweight blocks • Natural stone • Constructional granite • Limestone

300mm Hex Arbor HSM Cores

10mm Hexagon

M16 x 2.0

300

DL300X13S

D

D

DL100B4S

100mm SDS Plus Arbor

E

E

DL300B4S

HSM Core

300mm SDS Plus Arbor

CLPDS

7mm HSM Pilot Drill

DL100X13S

High Speed Masonry Cores are ideal when working on: • Waste pipes

100mm Hex Arbor

DID YOU KNOW?

200mm HSM Tommy Bar

DL300X13S

• Water feed pipes • Cable entry / exit

300mm Hex Arbor

The HSM is an original design and is

• Flue passage • Extractor fans • Exhausts • Dust extractor ducting

Recommended speed for these cores is largely governed by the power tool itself. This is because they are designed to be used in power tools where in the majority of cases there is no facility to regulate the speed (SDS Plus, SDS Max machines etc.).

If used in a machine where speed regulation is possible, a general recommendation is the larger diameter of the core drill being used, the slower the speed.

TECH TIP!

850W+

When cleanliness of breakout is critical, turn off hammer action and use ‘rotary only’ mode for the last part of the drilling process

When used with the relevant adaptor

M16 x 2.0

Coring can be carried out in ‘rotary and impact’ mode or ‘rotary only’ mode

For non-stop deep core drilling in lighter masonry materials such as soft brick & lightweight block. See page 35

Have you tried?

Dry Diamond Core Drills?

43

44