Armeg Product Guide

Cable Guiding - SDS Plus Drill Bits

Cable Guiding - SDS Plus Drill Bit Part Numbers & Technical Information

Perfect for….. The one tool solution for guiding cables through cavity walls

Cable Guiding - SDS Plus Drill Bits

Description

Diameter Size mm

Overall Length

Working Length

Part Number

mm

mm

10mm x 400mm Cable Guide Drill Bit

10

400

310

CGS10.0X400

A

16mm x 600mm Cable Guide Drill Bit

16

600

510

CGS16.0X600

Cable Guide Drill Bits can be used in: • Brick & block constructed walls • (Not designed for engineering brick or concrete) • Thick & stone walls (16mm dia) Cable Guide Drill Bits are ideal for fitting cables including: • TV Co-axial • Telephone • Electric / power • Alarm system • Data • Large & multiple cable installation (16mm diameter)

Premium Quality SDS Drill Bit Produced using our premium quality Sheffield manufactured Qfds drill bits for strength and durability Precision Machined Cable Holes 2.5mm diameter precision machined holes in the drill shank and drill tip allow cables to be connected to the drill bit and simply pushed or pulled through the cavity Elongated Drive Slot Elongated drive slot enables the cable hole to be drilled at the products strongest point for durability. Cables also lie flat in the recessed slot meaning wire can be smoothly pulled through walls without snagging 400mm / 600mm Length Design Specifically designed to either 400mm or 600mm length to enable access through a cavity wall

A

B

C

B

D

C

D

B

DID YOU KNOW?

Our Cable Guide Drill Bits are designed, tested, proved and produced at our Sheffield HQ

Recommended speed for Cable Guide Drill Bit is largely governed by the power tool itself. This is because the product is designed to be used in power tools where in the majority of cases there is no facility to regulate the speed (i.e. SDS Plus machines).

TECH TIP!

If routing cable by using the hole near the carbide tip, please be aware that after drilling this end of the drill could be hot and should be

Scan me for demo video

allowed to cool before handling

Have you tried?

Ideal when longer distances / thicker structures need to be traversed See page 7

Cable Guide Rods

9

10