Armeg Product Guide

PTC - Tile Drilling Accessories

PTC - Tile Drilling Accessories Part Numbers & Technical Information

Perfect for….. Everything required to ensure our tile drilling systems are driven, cooled and accurately located

PTC Tile Drilling Accessories

Description

Technical Information

Part Number

PTC Water Feed Pump

PTCWFKIT

Suitable for all diameters of PTC Small

Water Feed Unit

DGTDWF5-35

Diamond Crown and Diamond Grit Tile Drill

All PTC tools utilise Armeg’s water feed pressure pump to ensure an effective and continuous flow of water to the cutting edge

Water Delivery System

Drive adaptor for PTC Diamond

PTC Drive Adaptor (13 - 58mm Crowns)

PTCPAD

Crown Drills 13 - 58mm

PTC Guide Pad Multi-Pack x 25

Adhesive guide pads for PTC Diamond Crown Drills 6 - 10mm

PTCMULTIGP25

(6 - 10mm Crowns)

PTC Guide Pad Multi-Pack x 100

Adhesive guide pads for PTC Diamond Crown Drills 6 - 10mm

PTCMULTIGP100

(6 - 10mm Crowns)

PTC – Large Diamond Crown Drilling Accessories & Water Delivery

Features an integral attachment which the Water Feed Pressure Pump Pipe slots into. Water coolant is then driven internally to the Large Diamond Crown and directly to the cutting edge

Diamond Crown Adaptor Usage Diagram

Diamond Crown Adaptor (13-58mm)

Large Diameter Crown (13-58mm)

PTCPAD

DID YOU KNOW?

When using the PTCPAD adaptor with Large Diameter Crowns the guide rod will fit securely into an 8mm pilot hole for non-slip start up and accurate hole location

TECH TIP!

TECH TIP!

The Diamond Crown Guide Pads are only

1 or 2 pumps on the Water Feed Pump

designed to be used once and should be disposed of after use. When using the Guide Pads, make sure the tile is clean and dry for better adhesion

handle should be sufficient for most

1/2” U.N.F

applications and should avoid excessive amounts of water being used

101

102