Ansell Lighting S18

160

CODING EXPLAINED

With a massive number of possibilities to choose from, our extensive range of LED-CELL strips cater to every application. The step-by-step guide below simplifies the selection process, helping you find the right strip for your needs. For specific details such as available wattages, sizes, IP ratings, and colour options, refer to the product-specific pages that follow

CODE PART 1: STRIP MODEL/RANGE Start by choosing the range based on your needs (e.g., COB C-CELL, ECO E-CELL, DIM-TO-WARM D-CELL). The code begins with the letter of the range, followed by /. For example C/

MODEL

C

COB

CODE PART 2: VOLTAGE Most strips operate at 24V, except U-CELL (48V). Add the voltage to the code. For example C/24

VOLTAGE

24

24V

CODE PART 3: POWER/OUTPUT Determine the wattage per meter for your strip. The number in the code corresponds to this wattage (e.g., 03 = 10W/m). For example C/24/03

POWER / OUTPUT 03 10W/m

CODE PART 4: IP RATING Choose the appropriate IP rating for your environment (e.g., 20 = IP20). For example C/24/03/20

IP RATING

20

IP20

CODE PART 5: COLOUR Specify the strip colour (e.g., 01 = White, 02 = RGB). For example C/24/03/20/01

COLOUR

01

White

CODE PART 6: COLOUR TEMPERATURE Select the correlated colour temperature (CCT) as a two-digit code (e.g., 22 = 2200K). For example C/24/03/20/01/22

COLOUR TEMP 22

2200K

LENGTH (M)

CODE PART 7: LENGTH OF STRIP Choose the length based on your requirements (e.g., S01 = 5m, S02 = 10m). For example C/24/03/20/01/22/S01

S01 S02 S05

5m

10m 50m

Made with FlippingBook - Share PDF online